BlueAnt Wireless Voice Control Q1 User Manual

Taking Calls  
In a Noisy Environment?  
Upgrades  
Quick Start Guide  
English  
4
8
12  
You can answer the call with your  
voice: wait for the prompt to finish  
and then say Answer or Ignore.  
The Q1 has been designed to reduce background  
noise and wind interference.  
To enhance your experience, we are continually  
improving the Q1 software.  
If you find yourself in a very noisy or windy  
From time to time we will make feature  
enhancements available on our website for you to  
download and apply to your Q1.  
If you don’t want to wait for the  
prompt, or you are in a noisy place:  
environment, double click the  
button during a  
call to switch between standard and maximum noise  
reduction settings.  
> Click the  
button once to accept the call.  
Go to q1.blueantwireless.com to get the latest  
software for your Q1.  
> Double click the  
button to reject the call.  
To End a Call  
Click the  
button.  
Let’s Get Started  
Main Voice Commands  
Charging  
9
Problems?  
13  
1
5
1. Put the Q1 in your ear.  
If you are having trouble, you can  
reset the Q1 and start again:  
> Am I Connected?  
> Answer  
Your Q1 has been given an  
2. Hold down the  
button until you hear  
the welcome message  
(about 3 seconds).  
initial charge to get started, but in future you need to  
charge it for up to 2.5 hours.  
Am I  
Connected?  
1. Make sure the Q1  
is on and is not  
connected to any phones.  
> Call Back  
If the  
button flashes red when you switch the Q1  
> Call Information  
> Call Speed Dial 1-8  
> Cancel  
on, the battery is low. Use the supplied AC adaptor  
and USB cable to charge the Q1.  
3. Follow the voice  
prompts to pair the Q1  
with your phone.  
2. Click Vol +, Vol -  
and the  
button  
together.  
> During charging, the  
flashes red.  
> Check Battery  
> Ignore  
> When the light goes blue, the charge is complete.  
That’s it! You’re ready to go.  
3. You will hear the welcome message.  
> For safety reasons, the Q1 automatically turns off  
during charging.  
Tip: The code for the Q1 is 0000 (four zeros).  
WARNING: Prolonged use at high volumes can cause noise induced hearing loss.  
Follow the voice prompts to  
pair the Q1 with your phone.  
> Pair Me  
Use your Voice  
2
Main Voice Commands  
Switching On and Off  
10  
Help and Support  
6
14  
button  
to Control the Q1  
> Phone Commands  
> Redial  
To switch the  
Q1 on or off  
hold down  
This guide is just to get you started with your Q1.  
(BlueAnt button)  
When you want to  
Pair  
Me  
If you are having trouble getting the Q1 to work, visit  
docs.blueantwireless.com to download the user  
guide, which has full details of all the Q1’s features  
and functions.  
Microphones  
do something:  
> Settings Menu  
> Switch Headset Off  
> Teach Me  
the  
button  
1. Click the  
button  
for about 3  
seconds.  
and wait for the  
Q1 to ask you to  
Please call us before returning the Q1 to a store and  
we will help you through any difficulty you may have.  
“Say a Command”.  
Switch  
Headset  
Off  
Vol -  
Vol +  
> What Can I Say?  
2. Say one of the  
voice commands  
loudly and clearly.  
You can also switch  
off using this voice  
command:  
> In North America call 1 866 891 3032.  
Tip: Use the Teach Me command to learn about your  
Q1, or say What Can I Say? to hear a list of all the  
voice commands.  
> In other countries please see  
www.blueantwireless.com for your local support  
number.  
To learn the voice commands, say What Can I Say?  
Making Calls  
A2DP Audio Streaming  
7
The Q1 supports A2DP audio streaming: if your  
phone supports A2DP streaming you can play music,  
podcasts or any other audio and it will automatically  
be streamed to the Q1.  
Pairing Another Phone  
Terms and Conditions  
15  
3
11  
By using this product you are agreeing to BlueAnt’s terms and  
conditions, available at www.blueantwireless.com.  
Click the  
button and wait for the Q1 to ask you  
The Q1 automatically  
goes into pairing  
mode the first time  
you switch it on.  
to “Say a Command”. Then say one of the voice  
commands:  
In order to activate your full warranty coverage, please  
register your product online at www.blueantwireless.com.  
> Say Redial to redial the last number you called.  
Warning: All BlueAnt headsets are designed to reach volumes  
of up 100 decibels. Prolonged use at high volumes may affect  
your hearing capacity. Using for extensive time periods may  
result in noise induced hearing loss (NIHL).  
You only need to pair your phone once, but if you  
want to pair another phone later on, just say Pair Me.  
You can also use this feature to hear turn-by-turn  
direction information from a GPS application on your  
phone. Simply start the GPS application and the  
audio will automatically transfer to your headset.  
> Say Call Back to return the last call you received.  
> The Q1 can store pairing information for up to 8  
> Say Phone Commands to use phone voice dialling  
(if your phone supports it).  
Bluetooth® devices.  
The Bluetooth® word mark and logos are registered  
trademarks owned by Bluetooth SIG, Inc. and any use of such  
marks by BlueAnt Wireless is under license.  
> Up to 2 devices can be connected at the same  
time and you can answer whichever one rings  
(multipoint).  
The audio will automatically pause if you make or  
receive a phone call, and resume when the call ends.  
> Say Call Speed Dial followed by 1 to 8.  
© 2009 BlueAnt Wireless. All Rights Reserved.  

Advent Audiovox Car Video System ADV35 User Manual
Alesis POWER AMPLIFIER RA500 User Manual
A O Smith GWT 300 User Manual
Burnham Independence IN10 User Manual
Canon EF 16 User Manual
Casio Cash Register 130CR User Manual
Cornelius Agitator Motor 569000207 User Manual
Ericsson Multi Format Receiver RX1290 User Manual
Fujitsu FMWCC34 User Manual
Fusion Electronics Car Speaker EN SW100 User Manual